| |
| | Post Date: 2006-2-17 Expiry date: 4 months |
| |
| Detail |
This user's manual is for VoIP Phone. This user's manual will explain the keypad instruction, web configuration and command line configuration for the VoIP Phone. Before using the VoIP Phone, some setup processes are required to make the VoIP Phone work properly. Please refer to the Setup Menu for further information。
1.1Hardware Overview
The VoIP Phone has the following interfaces for Networking, telephone interface, LED indication, and power connector.
1.1.1Two RJ-45 Networking interface, these two interfaces support 10/100Mps Fast Ethernet. you can connect one RJ-45 Fast Ethernet port to the ADSL or Switch, and connect the other one to your computer.
1.1.2LED Indication: There are some LED indicators in the VoIP Phone to show the functions, like speaker phone, .Rggister, ….
Network Protocol:
"SIP v1 (RFC2543), v2(RFC3261)
"IP/TCP/UDP/RTP/RTCP
"IP/ICMP/ARP/RARP/SNTP
"TFTP Client/DHCP Client/ PPPoE Client
"Telnet/HTTP Server
"DNS Client |
|
|
